LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> RX 400h FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Brake Pedal Stroke Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pedal Stroke Sensor: Inspection

  1. INSPECT BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Inspect the brake pedal stroke sensor assembly. If any of the following occurs, replace with a new brake pedal stroke sensor assembly:
      Fig 1: Locating Brake Pedal Stroke Sensor Assembly Bolts
      G05277012Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • The surface of the brake pedal stroke sensor assembly is cracked, dented, or chipped off.
      • The connector is scratched, cracked, or damaged.
      • The brake pedal stroke sensor assembly has been dropped.
        • Fig 2: Identifying Brake Pedal Stroke Sensor Assembly Connector Terminals
        G05202742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Measure the resistance according to the value (s) in the table below.

      Resistance 

      RESISTANCE SPECIFICATION CHART

      Tester Connection Specified Condition
      1 (BSR) - 2 (BCSS) 21.45 to 23.15 Ω
scientia non olet · About LEMON Manuals