LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> RX 400h FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Electronically Controlled Brake System >> Diagnosis System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis System

  1. DIAGNOSIS 
    1. If the skid control ECU detects a malfunction, it will warn the driver by turning on the ABS, BRAKE and brake control warning lights and SLIP indicator light. It also warns the driver with the indication on the multi information display.

      The table below indicates which lights will come on when there is a malfunction in a particular function.

      Fig 1: Identifying ABS, Brake, Brake Control Warning Light And Slip Indicator Light
      G05202654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      DIAGNOSIS AND TROUBLE AREA REFERENCE

      Item / Trouble Area ABS EBD BA TRAC VSC
      ABS Warning Light - -
      BRAKE Warning Light - - - -
      Brake Control Warning Light
      SLIP Indicator Light
      Multi information display
      ◦: Light ON
      -: Light OFF
      • The DTCs are simultaneously stored in the memory. The DTCs can be read by connecting the SST between terminals TC and CG of the DLC3 and observing the blinking pattern of the ABS, brake control warning lights, or indication on the multi information display, or by connecting Techstream.
      • This system has a signal check function. The DTC can be read by connecting Techstream and observing the blinking pattern of the ABS and brake control warning lights or by reading the multi information display.
  2. WARNING LIGHT AND INDICATOR LIGHT BULB CHECK 
    1. Release the parking brake.
      NOTE: Before releasing the parking brake, set chocks to hold the vehicle for safety.

      HINT:

      • When the ignition switch is on, check that the ABS, BRAKE, brake control warning lights and SLIP indicator light come on for approximately 3 seconds.
      • If the warning light and indicator light check result is not normal, proceed to PROBLEM SYMPTOMS TABLE  for the ABS, BRAKE, brake control warning light circuits, and SLIP indicator light circuit. If the indicator remains on, proceed to troubleshooting for the light circuit below.
        TROUBLE AREA REFERENCE

        Trouble area See procedure
        ABS warning light circuit ABS WARNING LIGHT REMAINS ON 
        BRAKE warning light circuit BRAKE WARNING LIGHT REMAINS ON 
        Brake control warning light circuit BRAKE CONTROL WARNING LIGHT REMAINS ON 
        SLIP indicator light circuit SLIP INDICATOR LIGHT REMAINS ON 
        Fig 2: Identifying ABS, Brake, Brake Control Warning Light And Slip Indicator Light
        G05202654Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002