Front Speed Sensor: Inspection
- INSPECT FRONT SPEED SENSOR
- Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one;
- The surface of the front speed sensor is cracked, dented, or chipped off.
- The connector or wire harness is scratched, cracked, or damaged.
- The front speed sensor has been dropped.
- Measure the resistance according to the value (s) in the table below.
Resistance
LH
RESISTANCE SPECIFICATION CHARTTester Connection Specified Condition 2 (FL+) -1 (FL-) 1.4 to 1.8 kΩ RH
RESISTANCE SPECIFICATION CHARTTester Connection Specified Condition 2 (FR+) -1 (FR-) 1.4 to 1.8 kΩ - Measure the resistance according to the value (s) in the table below.
Resistance
LH
RESISTANCE SPECIFICATION CHARTTester Connection Specified Condition 1 (FL-) - Body ground 10 kΩ or higher 2 (FL+) - Body ground 10 kΩ or higher RH
RESISTANCE SPECIFICATION CHARTTester Connection Specified Condition 1 (FR-) - Body ground 10 kΩ or higher 2 (FR+) - Body ground 10 kΩ or higher
- Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one;