DTC Check / Clear

CHECK DTC
1. Connect the Techstream (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. turn the Techstream on.
4. Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
5. Read DTCs on the by following the directions on the screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the Techstream on.
4. Enter the following menus:
  1. Select: Body Electrical / (desired system) / Trouble Codes.
5. Erase the DTCs following the prompts on the screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.