Inspection Procedure
- PRESS "EJECT" AND CHECK OPERATION
- Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.
OK:
CD is ejected.
NG: REPLACE RADIO RECEIVER ASSEMBLY
OK: Go to next step
- Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.
- REPLACE CD WITH ANOTHER AND RECHECK
- Check the installation condition of the radio receiver.
OK:
Installed properly.
NG: REPLACE RADIO RECEIVER ASSEMBLY
OK: CD IS FAULTY
- Check the installation condition of the radio receiver.