Inspection Procedure
- PRESS "EJECT" AND CHECK OPERATION
- Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
OK:
Cassette tape is ejected.
NG: REPLACE RADIO RECEIVER ASSEMBLY
OK: Go to next step
- Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
- CHECK CASSETTE TAPE
- Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
OK:
No problems with cassette tape.
NG: CASSETTE TAPE IS FAULTY
OK: Go to next step
- Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
- REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK
- Replace the cassette tape with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
NG: REPLACE RADIO RECEIVER ASSEMBLY
OK: CASSETTE TAPE IS FAULTY
- Replace the cassette tape with a normal one and check if the same problem occurs again.