Data List / Active Test

READ DATA LIST

HINT:

Using the Techstream Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

Connect the Techstream to the DLC3.
Turn the ignition switch ON.

Read the Data List.

Driver Door

DATA LIST REFERENCE - DRIVER DOOR

Tester Display	Measurement Item / Range	Normal Condition	Diagnostic Note
Mirror Position sensor V	Vertical mirror position I Min.: 0, Max.: 5 V	Within range from 0 to 5 V	-
Mirror Position Sensor H	Horizontal mirror position / Min.: 0, Max.: 5	Within range from 0 to 5 V	-

Passenger Door

DATA LIST REFERENCE - PASSENGER DOOR

Tester Display	Measurement Item / Range	Normal Condition	Diagnostic Note
Mirror Position Sensor V	Vertical mirror position / Min.: 0, Max.: 5 V	Within range from 0 to 5 V	-
Mirror Position Sensor H	Horizontal mirror position / Min.: 0, Max.: 5 V	Within range from 0 to 5 V	-

Body No. 3

DATA LIST REFERENCE - BODY NO. 3

tester Display	Measurement Item / Range	Normal Condition	Diagnostic Note
Mirror Selection SW (R)	Mirror selection switch signal for RH mirror / ON or OFF	ON: Switch is in R position OFF: Switch is in neutral or L position	-
Mirror Selection SW (L)	Mirror selection switch signal for LH mirror / ON or OFF	ON: Switch is in L position OFF: Switch is in neutral or R position	-
Mirror Position SW (R)	Mirror position switch signal (RIGHT) / ON or OFF	ON: RIGHT switch is ON OFF: Any switch except RIGHT is ON or all switches are OFF	-
Mirror Position SW (L)	Mirror position switch signal (LEFT)/ ON or OFF	ON: LEFT switch is ON OFF: Any switch except LEFT is ON or all switches are OFF	-
Mirror Position SW (Up)	Mirror position switch signal (UP) / ON or OFF	ON: UP switch is ON OFF: Any switch except UP is ON or all switches are OFF	-
Mirror Position SW (Dwn)	Mirror position switch signal (DOWN) / ON or OFF	ON: DOWN switch is ON OFF: Any switch except DOWN is ON or all switches are OFF	-
Outer Mirror Fold SW	Mirror retract signal / ON or OFF	ON: Switch is ON OFF: Switch is OFF	-
Outer Mirror Return SW	Mirror return signal / ON or OFF	ON: Switch is OFF OFF: Switch is ON	-
HINT: *: w/ Retractable Mirror

Driver Seat, Passenger Seat

DATA LIST REFERENCE - DRIVER SEAT, PASSENGER SEAT

Tester Display	Measurement Item / Range	Normal Condition	Diagnostic Note
Power voltage	Power supply for position control ECU & switch / Min.: 0, Max.: 19.89 V	Within range from 10 to 14 V	-
Vehicle Speed	Vehicle speed / 0 to 255 km/h (159 mph)	Actual vehicle speed	-
Ignition Switch	Ignition switch status / ON or OFF	ON: Ignition switch is ON OFF: Ignition switch is OFF	-
Key Unlock Switch	Key unlock warning switch signal / ON or OFF	ON: Key is in ignition key cylinder OFF: Key is not in ignition key cylinder	-
D-Door Courtesy	Door courtesy switch signal / ON or OFF	ON: Driver side door is open OFF: Driver side door is closed	-
P Switch	Shift lever position P signal / ON or OFF	ON: Shift lever on P OFF: Shift lever not on P	-
N Switch	Shift lever position N signal / ON or OFF	ON: Shift lever on N OFF: Shift lever not on N	-
M2 Switch	Seat memory switch M2 signal / ON or OFF	ON: Seat memory switch M2 is ON OFF: Seat memory switch M2 is OFF	-
M1 Switch	Seat memory switch M1 signal / ON or OFF	ON: Seat memory switch M1 is ON OFF: Seat memory switch M1 is OFF	-
SET Switch	Seat memory set switch signal / ON or OFF	ON: Memory set switch is ON OFF: Memory set switch is OFF	-
Memory No1	Driving position memorized in seat memory switch M1 / MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized	-
Memory No2	Driving position memorized in seat memory switch M2 / MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized	-
Driver Mirror Memory No1	Driver side mirror position memorized in seat memory switch M1 / MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized	-
Driver Mirror Memory No2	Driver side mirror position memorized in seat memory switch M2 / MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized	-
Passenger Mirror Mem No1	Front passenger side mirror position memorized in seat memory switch M1 / MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized	-
Passenger Mirror Mem No2	Front passenger side mirror position memorized in seat memory switch M2 / MEM or NOT MEM	MEM: Memorized NOT MEM: Not memorized	-
Otr(D) Mir Pos Mem No1	Driver side mirror position memorized in seat memory switch M1 / Min.: 0, Max.: 65535	Within range from 0 to 65535	-
Otr(P) Mir Pos Mem No1	Front passenger side mirror position memorized in seat memory switch M1 / Min.: 0, Max.: 65535	Within range from 0 to 65535	-
Otr(D) Mir Pos Mem No2	Driver side mirror position memorized in seat memory switch M2 / Min.: 0, Max.: 65535	Within range from 0 to 65535	-
Otr(P) Mir Pos Mem No2	Front passenger side mirror position memorized in seat memory switch M2 / Min.: 0, Max.: 65535	Within range from 0 to 65535	-

PERFORM ACTIVE TEST

HINT:

Performing the Techstream Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in the troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

Connect the Techstream to the DLC3.
Turn the ignition switch ON.

Perform the Active Test by following the directions on the tester screen.

Driver Door

ACTIVE TEST REFERENCE - DRIVER DOOR

Tester Display	Test Part	control Range
Mirror Heater	Mirror defogger operation OFF/ON	-
Mirror Fold / Return	Mirror retract operation FOLD / RETRN	-
Mirror Right / Left	Mirror horizontal operation RIGHT / LEFT	-
Mirror Up / Down	Mirror vertical operation UP / DOWN	-
HINT: *: w/ Retractable Mirror

Passenger Door

ACTIVE TEST REFERENCE - PASSENGER DOOR

Tester Display	Test Part	Control Range
Mirror Display	Mirror defogger operation OFF/ON	-
Mirror Fold / Return	Mirror retract operation FOLD / RETRN	-
Mirror Right / Left	Mirror horizontal operation RIGHT / LEFT	-
Mirror Up / Down	Mirror vertical operation UP / DOWN	-
HINT: *: w/ Retractable Mirror