PCV Valve: Installation

INTALL VENTILATION VALVE SUB-ASSEMBLY
1. Install the valve.
  1. Apply adhesive to 2 or 3 threads.
    Adhesive:
    
    Toyota genuine adhesive 1324, three bond 1324 or equivalent
    
    Fig 1: Applying Adhesive To Threads
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Install the valve.
    Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
    
    Fig 2: Identifying Ventilation Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    
    HINT:
    
    After applying the specified torque, rotate the valve clockwise with the port facing the direction shown in the illustration.
    
    Fig 3: Rotating Valve Clockwise
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the ventilation valve cover.
3. Connect the hose to the valve.
  
  Fig 4: Identifying Ventilation Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE AIR CONNECTOR PIPE
1. Connect the air hose and ventilation hose.
2. Install the bolt and intake air connector pipe with the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
3. Tighten the 2 hose clamps.
INSTALL NO. 1 AIR CLEANER INLET
1. Install the inlet with the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
INSTALL V-BANK COVER
1. Install the cover the 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)