Oil Pump: Replacement

REMOVE OIL PUMP SEAL
1. Using a screwdriver, pry out the seal.
  HINT:
  
  Tape the screwdriver tip before use.
  
  NOTE: To protect the oil pump body while prying out the seal, place a wooden block between the screwdriver and oil pump body.
  
  Fig 1: Removing Oil Pump Seal
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL OIL PUMP SEAL
1. Using SST and a hammer, tap in a new oil seal until its surface is flush with the oil pump body edge.
  SST 09316-60011 (09316-00011)
  
  NOTE: Be careful not to tap the oil seal in at an angle.
2. Apply a small amount of MP grease to the oil seal lip.
  
  Fig 2: Tapping Oil Seal To Oil Pump Body Edge
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002