Accelerator Pedal Rod: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ACCELERATOR PEDAL ROD
1. Disconnect the sensor connector.
2. Remove the 2 bolts and pedal rod.
  NOTE:
  - Do not drop or strike the accelerator pedal.
  - Do not disassemble the accelerator pedal.
    
    Fig 1: Locating Accelerator Pedal Rod With Bolts
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002