Camshaft Position Sensor: Installation
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL CAMSHAFT POSITION SENSOR
- Install the sensor with the bolt and stud bolt.
Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
- Install the sensor with the bolt and stud bolt.
- INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH (See INSTALLATION )
- INSTALL RADIATOR HOSE INLET
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see
INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see
INITIALIZATION
).
- ADD ENGINE COOLANT (See COOLANT )
- CHECK FOR ENGINE COOLANT LEAKS
- Check for engine coolant leaks (see COOLING SYSTEM ).
- INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
- INSTALL V-BANK COVER (See INSTALLATION )