LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Control System) >> Mass Air Flow Meter >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mass Air Flow Meter: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE MASS AIR FLOW METER 
    1. Disconnect the air flow meter connector.
    2. Remove the 2 screws and mass air flow meter.
    3. Remove O-ring from the mass air flow meter.
      Fig 1: Locating Mass Air Flow Meter With Screws
      G05291571Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals