LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Audio/Visual) >> Network Gateway Ecu >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Network Gateway Ecu: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NETWORK GATEWAY ECU 
    1. Install the ECU with the 2 screws.
      Fig 1: Locating ECU And Screws
      G05293164Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL REINFORCEMENT (See  INSTALLATION  ) 
  3. INSTALL NO. 2 HEATER TO REGISTER DUCT (See  INSTALLATION  ) 
  4. INSTALL NO. 3 HEATER TO REGISTER DUCT (See  INSTALLATION  ) 
  5. INSTALL NO. 1 HEATER TO REGISTER DUCT (See  INSTALLATION  ) 
  6. INSTALL FRONT DEFROSTER NOZZLE (See  INSTALLATION  ) 
  7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT (See  REMOVAL  ) 
  8. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT (See  INSTALLATION  ) 
  9. INSTALL NO. 1 INSTRUMENT PANEL PIN (See  INSTALLATION  ) 
  10. INSTALL STEERING COLUMN ASSEMBLY (See  INSTALLATION  ) 
  11. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    1. Install the instrument panel safety pad (see INSTALLATION ).
  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  13. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals