LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Audio/Visual) >> Network Gateway Ecu >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Network Gateway Ecu: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. TABLE OF BOLT, SCREW AND NUT (See  REMOVAL  ) 
  2. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE (See  REMOVAL   ) 
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  4. INSPECT CENTER FRONT WHEEL 
  5. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    1. Remove the instrument panel safety pad (see REMOVAL ).
  6. REMOVE STEERING COLUMN ASSEMBLY (See  DISASSEMBLY  ) 
  7. REMOVE NO. 1 INSTRUMENT PANEL PIN (See  DISASSEMBLY  ) 
  8. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (See  DISASSEMBLY  ) 
  9. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT (See  DISASSEMBLY  ) 
  10. REMOVE FRONT DEFROSTER NOZZLE (See  DISASSEMBLY  ) 
  11. REMOVE NO. 1 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  12. REMOVE NO. 3 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  13. REMOVE NO. 2 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  14. REMOVE INSTRUMENT PANEL REINFORCEMENT (See  REASSEMBLY  ) 
  15. REMOVE NETWORK GATEWAY ECU 
    1. Remove the 2 screws and ECU.
      Fig 1: Locating ECU And Screws
      G05293163Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals