Front Speed Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

HINT;

Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.

REMOVE FRONT WHEEL
REMOVE FRONT FENDER LINER LH
REMOVE FRONT SPEED SENSOR LH
1. Disconnect the sensor connector.
2. Remove the resin clip and 2 clamp bolts holding the sensor harness.
  
  Fig 1: Disconnecting Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the bolt and sensor.
  NOTE: Keep the sensor tip free from foreign matter.