LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Brake Control) >> Steering Angle Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEERING SENSOR 
  2. ADJUST CENTER FRONT WHEEL 
  3. INSTALL TURN SIGNAL SWITCH ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL SPIRAL CABLE SUB-ASSEMBLY (See  REMOVAL  ) 
  5. POSITION SPIRAL CABLE (See  INSTALLATION  ) 
  6. INSTALL STEERING WHEEL ASSEMBLY (See  INSTALLATION  ) 
  7. CHECK STEERING WHEEL CENTER POINT 
  8. INSTALL STEERING PAD ASSEMBLY (See  DISPOSAL  ) 
  9. INSTALL STEERING PAD SWITCH MODULATOR 
  10. INSTALL SWITCH AND VOLUME CASE 
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  12. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  13. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals