Back Window Frame: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

CLEAN BACK WINDOW GLASS (See INSTALLATION )
INSTALL BACK WINDOW GLASS ADHESIVE DAM (See INSTALLATION )
INSTALL BACK WINDOW GLASS (See INSTALLATION )
INSTALL ROOF SIDE RAIL WEATHERSTRIP RETAINER RH
1. Install the weatherstrip retainer with the 4 screws.
  
  Fig 1: Identifying Screws And Weatherstrip Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF SIDE RAIL WEATHERSTRIP RETAINER LH
HINT:

Use the procedures described for the RH side.
INSTALL REAR REMOVABLE ROOF WEATHERSTRIP
1. Install the removable roof weatherstrip rear with the clips.
2. Install the 4 screws, 2 nuts and 4 clips.
INSTALL BACK WINDOW FRAME SUB-ASSEMBLY UPPER
1. Install the back window frame.
  
  Fig 2: Identifying Back Window Frame And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a T40 "TORX" socket, install the 8 screws.
  Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf)
  
  Fig 3: Identifying Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR ROOF HEADLINING ASSEMBLY
1. Attach the 7 clips to install the roof headlining.
  
  Fig 4: Identifying Clips And Roof Headlining
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF SIDE GARNISH INNER RH
1. Attach the 7 clips to install the side garnish inner RH.
2. Install the clip labeled A.
  
  Fig 5: Identifying Clip Labeled A
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ROOF SIDE GARNISH INNER LH
HINT:

Use the same procedures described for the RH side.
INSPECT FOR LEAKS AND REPAIR (See INSTALLATION )