Package Tray Limit Switch: Inspection

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT NO. 1 PACKAGE TRAY SLIDE ROOF LIMIT SWITCH

Measure the resistance of the switch.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Switch Condition	Specified Condition
1 - 3	Not pushed	Below 1 Ω
1 - 3	Pushed	10 kΩ or higher

Fig 1: Inspecting No. 1 Package Tray Slide Roof Limit Switch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result not as specified, replace the slide roof limit switch.

INSPECT NO. 2 PACKAGE TRAY SLIDE ROOF LIMIT SWITCH

Measure the resistance of the switch.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Switch Condition	Specified Condition
1 - 3	Not pushed	Below 1 Ω
1 - 3	Pushed	10 kΩ or higher

If the result not as specified, replace the slide roof limit switch.

Fig 2: Inspecting No. 2 Package Tray Slide Roof Limit Switch