Data List / Active Test
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Read the DATA LIST according to the display on the tester.
Sliding roof control ECU
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note OPEN SW Sliding roof open switch signal / ON or OFF ON: Open switch is pushed
OFF: Open switch is not pushed- CLOSE SW Sliding roof close switch signal / ON or OFF ON: Close switch is pushed
OFF: Close switch is not pushed- TONNEAU COV SW Tonneau cover switch signal / ON or OFF ON: Tonneau cover is closed
OFF: Tonneau cover is open- LUG COURTESY Luggage courtesy / ON or OFF ON: Luggage door is opened
OFF: Luggage door is closed- ROOF LOCK SW Roof lock switch signal / ON or OFF ON: Roof is locked
OFF: Roof is unlocked- ROF CLS SW/R Roof close RH switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is opened- ROF CLS SW/L Roof close LH switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is opened- ROOF OPEN SW Roof open switch signal / ON or OFF ON: Roof is fully opened
OFF: Roof is half open or closed- ROOF POS SW1 Roof position No. 1 switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is fully opened- ROOF POS SW2 Roof position No. 2 switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is fully opened- ROOF POS SW3 Roof position No. 3 switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is fully opened- LUG FR LOK SW/R Luggage front lock RH switch signal / ON or OFF ON: Luggage door front lock is locked
OFF: Luggage door front lock is unlocked- LUG FR LOK SW/L Luggage front lock LH switch signal / ON or OFF ON: Luggage door front lock is locked
OFF: Luggage door front lock is unlocked- LG FL FR CLS SW Luggage door close switch signal / ON or OFF ON: Luggage door is fully closed
OFF: Luggage door is opened- LUG DOOR OPN SW Luggage door open switch signal / ON or OFF ON: Luggage door is fully opened
OFF: Luggage door is half open or closed- PACK TRAY SW1 Package tray No. 1 switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is fully opened- PACK TRAY SW2 Package tray No. 2 switch signal / ON or OFF ON: Roof is fully closed
OFF: Roof is fully opened- ROOF PULSE/R Roof drive motor RH pulse / Min.: 12288, Max.: 20480 12288 to 20480 - ROOF PULSE/L Roof drive motor LH pulse / Min.: 12288, Max.: 20480 12288 to 20480 - LUGGAGE PULSE/R Luggage drive motor LH pulse / Min.: 12288, Max.: 20480 12288 to 20480 - LUGGAGE PULSE/L Luggage drive motor RH pulse / Min.: 12288, Max.: 20480 12288 to 20480 - SHIFT POS, SPEED Shift position and vehicle speed signal / OK or NG OK: Shift lever in P or N, vehicle speed is less than 3 km/h (6 mph)
NG: Shift lever in any position except P and N, vehicle speed is 3 km/h (6 mph) or more- LUGGAGE CLOSE Luggage door close signal / OK or NG OK: Luggage door is fully closed
NG: Luggage door is opened- TONNEAU COV CLS Tonneau cover close signal / OK or NG OK: Tonneau cover close position
NG: Tonneau cover open position- LUG OPN MAIN SW Luggage opener main switch / OK or NG OK: Luggage opener main switch ON
NG: Luggage opener main switch OFF- D - WINDOW COND Driver side window glass position signal / FL CLS, HALF1, HALF2, FL OPEN FL CLS: Window glass fully closed position
HALF1: Window glass half open position 1
HALF2: Window glass half open position 2
FL OPN: Window glass fully open position- P - WINDOW COND Passenger side window glass position signal / FL CLS, HALF1, HALF2, FL OPN FL CLS: Window glass fully closed position
HALF1: Window glass half open position 1
HALF2: Window glass half open position 2
FL OPN: Window glass fully open position- HARD TOP COND Retractable hardtop system operation signal / FL CLS, HALF, FL OPN FL CLS: Retractable hardtop fully closed position
HALF: Retractable hardtop half open position
FL OPN: Retractable hardtop fully open position- ECM
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note IG SW REVERSE PNP switch status / ON or OFF ON: Shift lever position is R
OFF: Shift lever position is N- 2ND PNP switch status / ON or OFF ON: Shift lever position is 2
OFF: Shift lever position is N- LOW PNP switch status / ON or OFF ON: Shift lever position is L
OFF: Shift lever position is N- 3RD PNP switch status / ON or OFF ON: Shift lever position is 3
OFF: Shift lever position is N- 4TH (M) / DRIVE PNP switch status / ON or OFF ON: Shift lever position is 4
OFF: Shift lever position is N- DRIVE PNP switch status / ON or OFF ON: Shift lever position is D
OFF: Shift lever position is N- PNP SW (FSW) PNP switch status / ON or OFF ON: Shift lever position is N
OFF: Shift lever position is not N- ENGINE SPD Engine speed / Min.: 0 rpm, Max.: 16,383 rpm Almost same as actual engine speed (when engine is running) - Transponder key ECU
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note IGSW Ignition switch / ON or OFF ON: Ignition switch ON
OFF: Ignition switch OFF- Combination meter
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note SPEED METER Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Almost same as actual vehicle speed (when driving) - Luggage room junction block
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note LUGG COURTESY Luggage door courtesy switch is ON / OFF ON: Door is opened
OFF: Door is closed- Multiplex network door ECU front LH (Driver door ECU (Glass position))
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note GLASS POS-1/4 Glass position (Fully closed to 1/4 open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- GLASS POS - 2/4 Glass position (1/4 open to 2/4 open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- GLASS POS - 3/4 Glass position (2/4 open to 3/4 open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: ON or OFF ON: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- GLASS POS - OPEN Glass position (3/4 open to Fully open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- Multiplex network door ECU front RH (Passenger door ECU (Glass position))
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note GLASS POS - 1/4 Glass position (Fully closed to 1/4 open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- GLASS POS - 2/4 Glass position (1/4 open to 2/4 open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- GLASS POS - 3/4 Glass position (2/4 open to 3/4 open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- GLASS POS - OPEN Glass position (3/4 open to Fully open) OK/CAUTION ON: Power window is moving UP by manual operation CAUTION: May be displayed even when no resistance is applied in each position. In this case there is a foreign object stuck in that position.- A/C control (A/C amplifier)
ITEM DIAGNOSTIC NOTEItem Measurement Item / Display (Range) Normal Condition Diagnostic Note AMBI TEMP SENS Ambient temperature sensor /
min.: -23.3°C (-9.94°F)
max.: 65.95°C (150.71°F)Actual ambient temperature is displayed -