Navigation Ecu: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL NO. 2 DISC PLAYER BRACKET 
   1. Install the bracket with the 2 screws.
      Fig 1: Locating No. 2 Disc Player Bracket Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL DISC PLAYER BRACKET 
   1. Install the bracket with the 2 screws.
      Fig 2: Locating Disc Player Bracket Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL NAVIGATION ECU 
   1. Connect the 3 connector.
   2. Install the ECU with the bolt and 2 nuts.
      Fig 3: Locating Navigation ECU Connectors

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL LUGGAGE COMPARTMENT TRAY BRACKET FRONT 
   1. Install the 2 bracket with the 2 bolts and 2 nuts.
5. INSTALL LUGGAGE COMPARTMENT TRIM COVER FRONT (See  INSTALLATION  ) 
6. INSTALL TONNEAU COVER ASSEMBLY (See  INSTALLATION  ) 
7. INSTALL LUGGAGE COMPARTMENT TRIM COVER SUB-ASSEMBLY REAR (See  INSTALLATION  ) 
8. INSTALL TOOL BOX COVER (See  INSTALLATION  ) 
9. INSTALL SPARE WHEEL COVER ASSEMBLY 
10. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH (See  INSTALLATION  ) 
11. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH (See  INSTALLATION  ) 
12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 
13. INSTALL REAR FLOOR FINISH PLATE (See  INSTALLATION  ) 
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
15. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
       NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.