Inspection Procedure
WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK THE BLUETOOTH SETTINGS
- Check if the BLUETOOTH settings are correct.
OK:
BLUETOOTH settings are correct.
NG: SET SETTINGS CORRECTLY
OK: Go to next step
- Check if the BLUETOOTH settings are correct.
- CHECK CELLULAR PHONE
- Check if the cellular phone is BLUETOOTH capable.
HINT:
Some versions of BLUETOOTH capable cellular phone may not be compatible.
OK:
Phone is BLUETOOTH capable.
NG: END (ONLY BLUETOOTH CAPABLE CELLULAR PHONE CAN BE USED)
OK: Go to next step
- Check if the cellular phone is BLUETOOTH capable.
- CHECK SETTINGS
- Check if the cellular phone functions.
HINT:
- The cellular phone is locked.
- The directory is being transferred.
- The line is crossed.
- Transmission is regulated.
- The power is off.
- The cellular phone is not connected to BLUETOOTH ("BT" is displayed while connected).
OK:
Above conditions do not exist.
NG: SET SETTINGS CORRECTLY
OK: Go to next step
- Check if the cellular phone functions.
- CHECK CELLULAR PHONE
- Check if the cellular phone can call.
HINT:
When the battery charge is low, calls cannot be made or received.
OK:
Cellular phone can call.
NG: REPLACE CELLULAR PHONE
OK: Go to next step
- Check if the cellular phone can call.
- CHECK RECEPTION
- Set the cellular phone so that it can receive calls.
- Place the cellular phone close to the multi-display.
- Check if the cellular phone has reception according to the multi-display.
OK:
Cellular phone has reception.
NG: REPLACE MULTI-DISPLAY
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE