Speed Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL TRANSMISSION REVOLUTION SENSOR
1. Install the transmission revolution sensor SP2.
  1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
  2. Install the transmission revolution sensor with the bolt.
    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  3. Connect the transmission revolution sensor connector.
    
    Fig 1: Locating Transmission Revolution Sensor SP2 O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the transmission revolution sensor NT.
  1. Coat a new O-ring with ATF and install it to the transmission revolution sensor.
  2. Install the transmission revolution sensor with the bolt.
    Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  3. Connect the transmission revolution sensor connector.
    
    Fig 2: Locating Transmission Revolution Sensor NT O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002