LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> GS 350 RWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Integration Relay >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Integration Relay: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE COOL AIR INTAKE DUCT SEAL  . Refer to REMOVAL - Step 15
  3. REMOVE ENGINE ROOM SIDE COVER LH  . Refer to REMOVAL - Step 17
  4. REMOVE INTEGRATION NO. 1 RELAY 
    1. Remove the engine room No. 1 relay block cover.
      2. Fig 1: Identifying Integration Relay
      GTY103087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room No. 2 relay block.
    3. Disconnect the 3 connectors.
scientia non olet · About LEMON Manuals