Steering Angle Sensor: Installation: Installation

INSTALL STEERING ANGLE SENSOR
1. Align the locating pins, engage the 6 claws and install the steering angle sensor to the spiral cable sub-assembly.
  
  Fig 1: Identifying Steering Angle Sensor & Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR . Refer to INSTALLATION - Step 2
INSTALL STEERING COLUMN COVER . Refer to INSTALLATION - Step 7
INSTALL STEERING WHEEL ASSEMBLY . Refer to INSTALLATION - Step 9
INSTALL STEERING PAD . Refer to INSTALLATION - Step 1
INSTALL NO. 3 LOWER STEERING WHEEL COVER . Refer to INSTALLATION - Step 2
INSTALL NO. 2 LOWER STEERING WHEEL COVER . Refer to INSTALLATION - Step 3
INSPECT STEERING WHEEL CENTER POINT
1. Inspect the steering wheel center point.
CONNECT BATTERY NEGATIVE TERMINAL
INSPECT STEERING PAD . Refer to INSTALLATION - Step 5
INSPECT SRS WARNING LIGHT
HINT:

Refer to DIAGNOSIS SYSTEM