Inspection Procedure: Procedure

CHECK LOOSENESS OF V-RIBBED BELT
1. Check the tension of the belt by pushing it down with a finger.
  OK
  
  The tension of the belt is enough.
NG → REPLACE V-RIBBED BELT TENSIONER ASSEMBLY

OK: Go to next step
CHECK V-RIBBED BELT FOR WEAR
1. Check the V-ribbed belt for wear.
  OK
  
  The V-ribbed belt is not worn.
NG → REPLACE V-RIBBED BELT

OK: Go to next step
CHECK CLUTCH PULLEY FOR WEAR
1. Check the clutch pulley groove for wear or other defects.
  OK
  
  The clutch pulley groove is not damaged.
NG → REPLACE CLUTCH PULLEY

OK: Go to next step
CHECK THAT NOISE WHILE CLUTCH PULLEY IS OPERATING
1. Perform a driving test and check if noise occurs when decelerating.
  OK
  
  Noise does not occur.
NG → REPLACE CLUTCH PULLEY

OK → REPLACE GENERATOR ASSEMBLY