Removal

HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and LH side Removal.

3. REMOVE FRONT DOOR OPENING TRIM COVER RH
HINT: Use the same procedure for the RH side and LH side Removal.

4. REMOVE SIDE INSTRUMENT PANEL RH Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
8. REMOVE NO. 2 AIR DUCT





(a) Remove the screw and No. 2 air duct.
9. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY





(a) Disconnect the connector.
(b) Remove the screw and air conditioning amplifier assembly.