Inspection Procedure

CHECK TOUCH PANEL
1. Check for foreign matter on the display.
  OK:
  
  The display is clean.
  
  NG: CLEAN DISPLAY AND RECHECK TOUCH PANEL
  
  OK: Go to Next Step
CHECK TOUCH SWITCH (DISPLAY CHECK MODE)
1. Enter the "Display Check" mode (Touch Switch Check) (see DISPLAY CHECK MODE ).
2. Touch the display in the area where the switch malfunction occurs.
  OK:
  
  A "+" mark appears at the touched position.
  
  Fig 1: Touch Switch Check - Screen Display
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NG: REPLACE MULTI-DISPLAY (See REMOVAL )
  
  OK: PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )