Front Console Box: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see REMOVAL ).

1. INSTALL CONSOLE BOX ASSEMBLY 
   1. Attach the 2 claws.
   2. Connect the connectors.
   3. Install the console box with the 4 bolts and 2 screws.
      Fig 1: Identifying Console Compartment Door Sub-Assembly Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fig 2: Locating Console Box Connectors Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL CONSOLE COVER LOWER 
   1. Install the cover.
3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY 
   1. Connect the connector.
   2. Attach the 5 clips and 2 claws to install the end panel.
      Fig 3: Identifying Rear Console End Panel Sub-Assembly Clips And Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER 
   1. Connect the connector.
   2. Attach the 2 clips to install the console panel.
      Fig 4: Identifying Upper Console Panel Sub-Assembly, Clips And Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. INSTALL REAR CONSOLE PANEL UPPER 
   1. Connect the connectors.
   2. Attach the 6 clips.
   3. Install the panel with the 2 screws.
      Fig 5: Identifying Rear Upper Console Panel Clips With Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. INSTALL NO. 3 BOX PANEL 
   1. Attach the 4 claws to install the box panel.
      Fig 6: Identifying No. 3 Box Panel And Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
   1. Install the shift lever knob and twist it in the direction indicated by the arrow.
      Fig 7: Installing Shift Lever Knob

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 
   1. Attach the 8 clips and claw to install the finish panel.
      Fig 8: Identifying Instrument Panel Finish Panel RH Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 
   1. Attach the 8 clips and claw to install the finish panel.
      Fig 9: Identifying Instrument Panel Finish Panel RH Clips And Claw

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002