Front Console Box: Removal

REMOVE INSTRUMENT PANEL FINISH PANEL END LH
1. Using a molding remover, detach the 8 clips and claw.
2. Remove the finish panel.
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
1. Using a molding remover, detach the 8 clips and claw.
2. Remove the finish panel.
  
  Fig 1: Identifying Instrument Panel Finish Panel RH Clips And Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
1. Twist the shift lever knob in the direction indicated by the arrow and remove it.
  
  Fig 2: Twisting Shift Lever Knob
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 3 BOX PANEL
1. Using a screwdriver, detach the 4 claws.
  HINT:
  
  Tape the screwdriver tip before use.
2. Remove the box panel.
  
  Fig 3: Identifying No. 3 Box Panel And Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR CONSOLE PANEL UPPER
1. Place protective tape as shown in the illustration.
2. Move the shift lever to N.
3. Remove the 2 screws.
4. Using a screwdriver, detach the 6 clips.
  HINT:
  
  Tape the screwdriver tip before use.
5. Remove the panel and disconnect the connectors.
  
  Fig 4: Identifying Rear Upper Console Panel Clips And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
1. Place protective tape as shown in the illustration.
2. Detach the 2 clips.
3. Remove the console panel and disconnect the connector.
  
  Fig 5: Identifying Upper Console Panel Clips And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
1. Using a molding remover, detach the 5 clips and 2 claws.
2. Remove the end panel and disconnect the connector.
REMOVE CONSOLE COVER LOWER
1. Remove the cover.
REMOVE CONSOLE BOX ASSEMBLY
1. Remove the 4 bolts and 2 screws.
2. Disconnect the connectors.
3. Detach the 2 claws and remove the console box.
  
  Fig 7: Locating Console Box Connectors Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002