Inner Rear View Mirror: Installation

INSTALL INNER REAR VIEW MIRROR ASSEMBLY
1. Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.
  Torque: 1.8 N*m (18 kgf*cm, 16 in.*lbf)
2. Connect the connector.
  
  Fig 1: Identifying Inner Rear View Mirror Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INNER REAR VIEW MIRROR COVER (w/o Rain Sensor)
1. Attach the 2 claws to install the cover.
  
  Fig 2: Locating Inner Rear View Mirror Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL RAIN SENSOR COVER (w/ Rain Sensor)
1. Attach the 2 claws to install the rain sensor cover.
2. Push the stopper as shown in the illustration to fix the cover in place.
INSTALL MAP LIGHT ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )