LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460 AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel >> Fuel Pressure Regulator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Regulator: Installation

  1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (See  INSTALLATION   ) 
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  3. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  4. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  5. INSPECT FOR FUEL LEAK (See  ON-VEHICLE INSPECTION   ) 
  6. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER 
    1. Install the service hole cover with new butyl tape.
  7. INSTALL REAR SEAT ASSEMBLY LH (for Power Seat) 
    1. Install the rear seat assembly LH (see INSTALLATION ).
  8. INSTALL REAR SEAT ASSEMBLY LH (for Ottoman) 
    1. Install the rear seat assembly LH (see INSTALLATION ).
  9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) 
    1. Install the rear seat cushion assembly (see INSTALLATION ).
scientia non olet · About LEMON Manuals