Fuel Pump Resistor: Removal

REMOVE COWL TOP VENTILATOR LOUVER RH (See REMOVAL )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE FUEL PUMP RESISTOR
1. Disconnect the resistor connector.
2. Remove the bolt and resistor.
  
  Fig 1: Locating Bolt And Resistor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002