Inspection Procedure

READ DTC OUTPUT

Connect the Techstream to the DLC3.
Turn the engine switch on (IG) and turn the Techstream ON.
Enter the following menus: Powertrain/Engine/Trouble Codes.
Read DTCs.

Result

RESULT REFERENCE

Display (DTC Output)	Proceed to
P0630	A
P0630 and other DTCs	B

If any DTCs other than P0630 are output, troubleshoot those DTCs first.

NOTE: If P0630 is set, the VIN must be input to the ECM using the Techstream. However, all DTCs are cleared automatically by the Techstream when inputting the VIN. If DTCs other than P0630 are set, check them first.

B: GO TO DTC CHART (See DIAGNOSTIC TROUBLE CODE CHART )

A: Go to Next Step

INPUT VIN
1. Input VIN (see REGISTRATION ).
NEXT: END