AIR FUEL RATIO SENSOR (for AWD): Installation

INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
1. Using SST, install the air fuel ratio sensor to the exhaust manifold LH.
  SST 09224-00010
  
  Torque: without SST
  
  44 N*m (449 kgf*cm, 32 ft.*lbf)
  
  with SST
  
  40 N*m (408 kgf*cm, 30 ft.*lbf)
  
  HINT:
  - Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).
  - Make sure SST and the wrench are connected in a straight line.
2. Connect the air fuel ratio sensor connector.
  HINT:
  
  Hook the wire harness to the bracket.
  
  Fig 1: Installing Air Fuel Ratio Sensor To Exhaust Manifold LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
1. Using SST, install the air fuel ratio sensor to the exhaust manifold RH.
  SST 09224-00010
  
  Torque: without SST
  
  44 N*m (449 kgf*cm, 32 ft.*lbf)
  
  with SST
  
  40 N*m (408 kgf*cm, 30 ft.*lbf)
  
  HINT:
  - Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).
  - Make sure SST and the wrench are connected in a straight line.
2. Connect the air fuel ratio sensor connector.
  HINT:
  
  Hook the wire harness to the bracket.
  
  Fig 2: Installing Air Fuel Ratio Sensor To Exhaust Manifold RH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE AND TRANSMISSION
1. Install the engine and transmission (See INSTALLATION ).