Data List/Active Test

HINT:

Using the Techstream to perform Active Test allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the tester on.
4. Enter the following menus: Body Electrical/Combination Meter/Active Test.
5. According to the display on tester, perform the "Active Test".

   Combination Meter: 

   COMBINATION METER REFERENCE
   
   

   Tester Display	Test Part	Control Range
   D-seat Belt*	Driver side seat belt warning light	ON or OFF
   P-seat Belt*	Front passenger side seat belt warning light	ON or OFF
   HINT: *: Confirm that the vehicle is stopped with the engine idling.