Floor Shift Assembly: Inspection
- INSPECT TRANSMISSION CONTROL SWITCH
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
RESISTANCE REFERENCETester Connection Shift Lever Position Specified Condition 3 (IG) - 7 (S) S, "+" or "-" Below 1 Ω 2 (SFTU) - 5 (E) Shift lever held in "+" (Up-shift) Below 1 Ω 1 (SFTD) - 5 (E) Shift lever held in "-" (Down-shift) Below 1 Ω 3 (IG) - 7 (S) Not in S, "+" or "-" 10 kΩ or higher 2 (SFTU) - 5 (E) S 10 kΩ or higher 1 (SFTD) - 5 (E) S 10 kΩ or higher Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the transmission floor shift assembly.
- Measure the resistance according to the value(s) in the table below.