LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460 AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Aa80F) >> Floor Shift Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Shift Assembly: Removal

  1. REMOVE COWL TOP VENTILATOR LOUVER  (See REMOVAL )
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
    NOTE:
    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
    • After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
  3. REMOVE CONSOLE BOX ASSEMBLY 
    1. Remove the console box (See REMOVAL ).
  4. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. Remove the 2 screws and pull out the duct to remove it.
  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY 
    1. Remove the front exhaust pipe (See REMOVAL ).
  6. REMOVE FRONT FLOOR NO. 1 HEAT INSULATOR  (See REMOVAL )
  7. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY 
    1. Move the shift lever to N.
    2. Remove the nut and disconnect the shifting rod from the connecting rod swivel.
    Fig 1: Locating Floor Shift Gear Shifting Rod
    G06191305Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. Disconnect the 2 connectors.
    2. Detach the 6 wire harness clamps from the floor shift.
    3. Remove the 4 bolts and floor shift.
    Fig 2: Identifying Floor Shift And Bolts
    G06191378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals