Fuel Relief Valve: Installation

INSTALL FUEL RELIEF VALVE ASSEMBLY
1. Install a new gasket to the relief valve.
2. Using a 14 mm deep socket wrench, install the relief valve to the No. 2 delivery pipe.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
  NOTE:
  - Do not apply oil to the threads of the relief valve and delivery pipe.
  - Do not allow foreign matter to enter the pipe during the installation.
    
    Fig 1: Locating Relief Valve
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the No. 1 fuel pipe.
4. Connect the No. 3 fuel hose.
  
  Fig 2: Identifying No. 3 Fuel Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
INSTALL INTAKE MANIFOLD
1. Install the intake manifold (see INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  
  Fig 3: Identifying No. 1 Engine Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADD ENGINE COOLANT (See REPLACEMENT )
INSPECT FOR COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSPECT FOR FUEL LEAK (See ON-VEHICLE INSPECTION )