LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460 RWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Registering Tire Pressure Sensor Id Codes >> Using Techstream
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Techstream

  1. Connect Techstream to the DLC3.
  2. Turn the engine switch ON.
  3. Turn the tester ON.
  4. Enter the menu items in this order: Chassis / Tire Pressure Monitor / Utility / ID Registration
  5. Perform the procedures displayed on the tester
  6. Confirmation of transmitter ID registration: Enter the menu items in this order: Chassis / Tire Pressure Monitor / Data List. Read the "ID Tire Inflation Pressure" values.
NOTE: It may take up to about 2 or 3 minutes to update the tire pressure data. If the values are not displayed after a few minutes, perform troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25.
NOTE: If the IDs have not been registered, DTC C2171/71 is set in the tire pressure warning ECU after 3 minutes or more.
NOTE: The tire pressure information reception condition can also be confirmed through the multi-information display's tire pressure display screen.
scientia non olet · About LEMON Manuals