General Maintenance

1. Check the brake linings and drums.
2. Inspect the front brake pads and discs (see INSPECTION ).
3. Inspect the rear brake pads and discs (see INSPECTION ).
4. Inspect the parking brake linings (see INSPECTION ).

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.

1. Using a mirror, check the entire circumference and length of the brake lines and hoses for:
   • Damage
   • Wear
   • Deformation
   • Cracks
   • Corrosion
   • Leaks
   • Bends
   • Twists
     Fig 1: Inspecting Brake Lines And Hoses

     Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check all the clamps for tightness and the connections for leakage.
3. Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.
4. Check that the lines are installed properly and pass through the center of the grommets.