Display Check Mode

HINT:

• This mode checks the color display on the television display.
• Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be exactly the same as on the actual vehicle.
• Use the remote controller for each inspection.
  Fig 1: Identifying Remote Controller

  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
• The television display is not a touch panel type. Do not touch the screen.

1. ENTER DIAGNOSTIC MODE 
   1. Enter the diagnostic mode [w/ Navigation System (for HDD)] (see DTC CHECK/CLEAR ).
   2. Enter the diagnostic mode [w/ Navigation System (for DVD)] (see DTC CHECK/CLEAR ).
   3. Enter the diagnostic mode [w/o Navigation System] (see DTC CHECK/CLEAR  ).
2. COLOR BAR CHECK 
   1. Select "Color Bar Check" from the "RSE Check" screen.
      Fig 2: Screen Display - Color Bar Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Select a color bar from the "Color Bar Check Mode" screen.
   3. Check the display color.

      HINT:

      • The entire screen turns to the color or stripe selected.
      • The screen returns to the "Color Bar Check" screen if the remote controller is operated again.
        Fig 3: Screen Display - Color Bar Check Mode

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. REMOTE COMMANDER CHECK 
   1. Select "Remote Commander Check" from the "RSE Check" screen.
      Fig 4: Screen Display - Remote Commander Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Operate each switch and check that the switch name and condition are correctly displayed.
      Fig 5: Checking Remote Commander (Display Check Mode)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. VEHICLE SIGNAL CHECK 
   1. Select "Vehicle Signal Check" from the "RSE Check" screen.
      Fig 6: Screen Display - Vehicle Signal Check

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

      HINT:

      • Only conditions having inputs are displayed.
      • This screen is updated once per second when input signals to the vehicle are changed.
        Fig 7: Screen Display - Vehicle Signal Check Mode

        Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        DISPLAY CHART
        
        

        Display	Contents
        *1: Battery	Battery voltage is displayed.
        *2: VTR ADAPTER	Displays if exterior input through VTR adapter is possible or not. ON: Exterior input possible OFF: Exterior input not possible HINT: Display only shows if there is VTR adapter. Display does not show if exterior input device is connected.

5. AUTO OPEN/CLOSE CHECK 
   1. Select "Auto Open/Close Check Mode" screen.
      Fig 8: Screen Display - Auto Open/Close Check Mode

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. This is the screen for inspecting the electronic open and close function of the RSE.
      Fig 9: Screen Display - Auto Open/Close Check Mode Screen

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      DISPLAY CHART
      
      

      Display	Contents
      *1: STATUS	Electronic open and close function status.
      *2: Counter	Counts number of electronic open and close operations. 1 count occurs if display opens 90° or more. Open and close counter can display up to 5 digits (limit: 99999).