LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460L AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Combination Meter >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Meter: Installation

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the connector.
      Fig 1: Connecting Combination Meter Connector
      G04945195Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the combination meter with the 4 screws.
      Fig 2: Locating Combination Meter Screws
      G04945183Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Apply protective tape to the area shown in the illustration.
      Fig 3: Identifying Protective Tape Applying Area
      G04945197Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
    3. Attach the 2 clips to install the finish panel.
    4. Install the 2 clips.
      5. Fig 4: Identifying Finish Panel Clips
      G04945198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY  (See INSTALLATION )
  4. INSTALL STEERING COLUMN COVER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (see CUSTOMIZE PARAMETERS ).
  6. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  7. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals