PCV Valve: Installation

INSTALL PCV VALVE
1. Apply a light coat of engine oil to the O-ring.
2. Install the PCV valve.
  Torque: 3.5 N*m (36 kgf*cm, 31 in.*lbf)
  
  HINT:
  - When reusing the PCV valve, inspect the O-ring.
  - If the O-ring has scratches or cuts, replace the PCV valve.
    
    Fig 1: Identifying PCV Valve O-Ring
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PCV VALVE HOSE
1. Install the hose to the PCV valve.
Fig 2: Locating PCV Hose Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INTAKE MANIFOLD
1. Install the intake manifold (see INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
INSTALL COWL TOP VENTILATOR LOUVER RH (See INSTALLATION )