On-Vehicle Inspection
- CHECK INTAKE AIR CONTROL FUNCTION
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the tester ON.
- Enter the following menus: Powertrain/Engine/Active Test/Activate the VSV for Intake Control.
- When power is supplied, check that the actuator rod operates.
- INSPECT AIR CLEANER FILTER ELEMENT
- Check that the air cleaner filter elements are not excessively dirty.
If the air cleaner filter elements are excessively dirty, replace both of them at the same time.
- Check that the air cleaner filter elements are not excessively dirty.