Fuel Pressure Sensor: Removal

PRECAUTION (See REMOVAL )
DISCHARGE FUEL SYSTEM PRESSURE
1. Discharge fuel system pressure (see PRECAUTION ).
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
REMOVE INTAKE MANIFOLD
1. Remove the intake manifold (see REMOVAL ).
REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY

Fig 1: Identifying No. 2 Engine Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PRESSURE SENSOR
1. Disconnect the connector.
2. Remove the fuel pressure sensor and gasket.
  
  Fig 2: Locating Fuel Pressure Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002