Crankshaft Position Sensor: Installation: Installation

WARNING: This page is about a different car, the 2010 Lexus LS 460L and 2010 Lexus LS 460. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CRANKSHAFT POSITION SENSOR
1. Install the crankshaft position sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 1: Locating Crankshaft Position Sensor Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the crankshaft position sensor connector.
INSTALL NO. 2 ENGINE UNDER COVER (for 2WD) . Refer to INSTALLATION - Step 96
INSTALL NO. 2 ENGINE UNDER COVER (for AWD) . Refer to INSTALLATION - Step 113