LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2009 >> LS 460L AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Engine Control System (Service Information)) >> Knock Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Removal: Removal

WARNING: This page is about a different car, the 2010 Lexus LS 460L and 2010 Lexus LS 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 7
  3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 8
  4. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY LH  . Refer to REMOVAL - Step 9
  5. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY  . Refer to REMOVAL - Step 10
  6. REMOVE SEPARATOR CASE 
    1. Disconnect the fuel pressure sensor connector.
      Fig 1: Identifying Fuel Pressure Sensor Connector
      GTY105299Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and separator case.
      Fig 2: Locating Separator Case And Bolts
      GTY102394Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE KNOCK SENSOR 
    1. Disconnect the 4 knock sensor connectors.
      Fig 3: Locating Knock Sensor Connector And Bolts
      GTY147488Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and 4 knock sensors.
scientia non olet · About LEMON Manuals