Torque Specifications

Camshaft Oil Control Valve

CAMSHAFT OIL CONTROL VALVE TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Camshaft timing oil control valve assembly (for Bank 1) x Cylinder head cover	10	102	7
Camshaft timing oil control valve assembly (for Bank 2) x Cylinder head cover	10	102	7

Camshaft Timing Control Motor

CAMSHAFT TIMING CONTROL MOTOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Camshaft timing control with EDU motor assembly LH x Timing chain cover	21	214	15
Camshaft timing control with EDU motor assembly RH x Timing chain cover	21	214	15
Engine wire bracket x Timing chain cover	12	122	9

Throttle Body

THROTTLE BODY TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Throttle body assembly x Intake manifold	10	102	7
Intake air connector pipe x Throttle body assembly x Hose clamp	4.8	49	42 in.*lbf
Intake air connector pipe x Intake air resonator x Hose clamp	3.8	39	34 in.*lbf
No. 1 air cleaner inlet x Upper radiator support	5.0	51	44 in.*lbf

ECM

ECM TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
ECM x ECU box	5.5	56	49 in.*lbf
TCM x ECU box	5.5	56	49 in.*lbf
Engine room ECU cover x ECU box	5.5	56	49 in.*lbf

Accelerator Pedal

ACCELERATOR PEDAL TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Accelerator pedal x Body panel	5.4	55	48 in.*lbf

Mass Air Flow Meter

MASS AIR FLOW METER TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Mass air flow meter sub-assembly (for Bank 1) x Air cleaner cap sub-assembly LH	1.0	10	9 in.*lbf
Mass air flow meter sub-assembly (for Bank 2) x Air cleaner cap sub-assembly RH	1.0	10	9 in.*lbf
Air cleaner cap sub-assembly LH x Intake air connector pipe x Hose clamp	3.8	39	34 in.*lbf
Air cleaner cap sub-assembly RH x Intake air connector pipe x Hose clamp	3.8	39	34 in.*lbf

Camshaft Position Sensor

CAMSHAFT POSITION SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Camshaft position sensor x Cylinder head cover RH	10	102	7

VVT Sensor

VVT SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
VVT sensor x Cylinder head cover LH and RH	10	102	7
Air cleaner case RH x Cylinder head cover RH	5.0	51	44 in.*lbf
Air cleaner case LH x Cylinder head cover LH	5.0	51	44 in.*lbf
Air cleaner case RH x Intake air connector pipe	3.8	39	34 in.*lbf
Air cleaner case LH x Intake air connector pipe	3.8	39	34 in.*lbf

Crankshaft Position Sensor

CRANKSHAFT POSITION SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Crankshaft position sensor x Flywheel housing	10	102	7

Engine Coolant Temperature Sensor

ENGINE COOLANT TEMPERATURE SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Engine coolant temperature sensor x front water by-pass joint	13(20)	133 (200)	10 (14)
(): For use without ball joint lock nut wrench

Knock Sensor

KNOCK SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Knock sensor x Cylinder block	20	204	15
Separator case x Cylinder block	10	102	7

Air Fuel Ratio Sensor

AIR FUEL RATIO SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Air fuel ratio sensor (for Bank 1 Sensor 1) x Exhaust manifold LH	40 (44)	408 (449)	30 (32)
Air fuel ratio sensor (for Bank 2 Sensor 1) x Exhaust manifold RH	40 (44)	408 (449)	30 (32)
(): For use without SST

Heated Oxygen Sensor

HEATED OXYGEN SENSOR TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Heated oxygen sensor (for Bank 1 Sensor 2) x Front Exhaust Pipe LH	40 (44)	408 (449)	30 (32)
Heated oxygen sensor (for Bank 2 Sensor 2) x Front exhaust pipe RH	40 (44)	408 (449)	30 (32)
(): For use without SST