Automatic Transaxle (Aa80F): TCM: Installation

INSTALL TCM
1. Install the TCM with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 48 in.*lbf)
2. Connect the 4 connectors.
Fig 1: Locating Nuts And TCM
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE ROOM ECU COVER
1. Install the engine room ECU cover with the 3 bolts.
  Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf)
  
  Fig 2: Identifying Engine Room ECU Cover And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE ROOM SIDE COVER LH
INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
1. Install the air cleaner inlet cover with the 2 clips.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSTALL COWL TOP VENTILATOR LOUVER (See INSTALLATION )
CHECK AUTOMATIC TRANSMISSION SYSTEM PRECAUTION
1. After replacing the TCM, certain procedures are necessary (See AUTOMATIC TRANSMISSION SYSTEM ).