April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that customize of the function is possible.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting.

Select the setting by referring to the table below.

Door Lock

DOOR LOCK CUSTOMIZE PARAMETERS REFERENCE

Display (Item)	Default	Contents	Setting
Auto Unlock/Shift (Unlock w/ engine switch on (IG), shift P, speed 0 km/h (0 mph))	ON	Function that unlocks all doors when lever is shifted to P from any position other than P while the engine switch is on (IG)	ON/OFF
All Unlock/Open-Close (All unlock w/ D door open-close)	OFF	Function that unlocks all other doors when opening driver door within 10 seconds after turning the engine switch is on (IG)	ON/OFF
Unlock Key Twice (Unlock w/ 2 times D key operation)	ON	Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors.	ON/OFF
Auto Lock/Shift (Auto lock/shift not P)	ON1 OFF2	With engine running and all doors closed, function that locks all doors when lever is shifted to P from any position other than P	ON/OFF
Auto Lock	OFF1 ON2	Function that locks all doors when vehicle speed reaches a certain level	ON/OFF
HINT: 1: Except Korea 2: for Korea